[Sean]

They are very good drives this one:

Umart Online Store

300gig for $375, but it is 10,000rpm and you would notice the difference espeically when using Photoshop and video editing software

WD Code WD3000GLFS
Compatibility - Windows Vista/XP/2000
- SATA interface connector on motherboard or SATA host controller*
- Available 3.5-inch internal drive bay

*Compatibility may vary depending on user's hardware configuration and operating system.
Package Contents - 3 Gb/s SATA hard drive
- WD SATA interface cable
- Quick Install Guide
- Mounting screws
Performance Specifications
Transfer Rates Buffer To Host (Serial ATA)
3 Gb/s (Max)

Transfer Rate (Buffer To Disk)
120 MB/s (Sustained)
Physical Specifications
Formatted Capacity 300,069 MB
Capacity 300 GB
Interface SATA 3 Gb/s
User Sectors Per Drive 586,072,368
Physical Dimensions Height: 1.028 Inches/26.1 mm (Max)
Length: 5.787 Inches/147 mm (Max)
Width: 4.00 Inches (+/- 0.010 inch)/101.6 mm
Weight: 1.08 Pounds/0.489 kg
Environmental Specifications
Shock Operating Shock (Read): 65G, 2 ms
Non-operating Shock: 300G, 2 ms
Acoustics Idle Mode: 29 dBA (average)
Seek Mode 0: 36 dBA (average)
Temperature Operating: 32° F to 140° F/-0° C to 60° C
Non-operating: -40° F to 158° F/-40° C to 70° C
Humidity Operating: 5-95% RH non-condensing
Non-operating: 5-95% RH non-condensing
Altitude Operating: -1,000 feet to 10,000 feet/-305M to 3,050M
Non-operating: -1,000 feet to 40,000 feet/-305M to 12,200M
Vibration Operating
Linear: 20-300 Hz, 0.75G (0 to peak)
Random: 10-300 Hz, 0.008 g² / Hz

Non-operating
Low Frequency: 0.05 g²/Hz (10 to 300 Hz)
High Frequency: 20-500 Hz, 4.0G (0 to peak)
Electrical Specifications Current Requirements

12 VDC
Read/Write: 225 mA
Idle: 200 mA
Standby: 6 mA
Sleep: 6 mA

5 VDC
Read/Write: 675 mA
Idle: 425 mA
Standby: 70 mA
Sleep: 70 mA

Power Dissipation
Read/Write: 6.08 Watts
Idle: 4.53 Watts
Standby: 0.42 Watts
Sleep: 0.42 Watts